Go to Top

Upcoming Webinar: Selecting Exterior Topcoats Based on Aesthetic Performance

AGC Chemicals Americas is proud to sponsor a free webinar for Durability and Design.

This program is eligible for 1 AIA Learning Unit.

Participants will learn about the aesthetic performance of the most common types of topcoats, examine the effects of UV exposure on color & gloss retention, and learn how to select & specify topcoats based on expected levels of gloss & color retention performance.

Learning Objectives

• Understand what UV light is

• Learn how UV degrades a coating binder and color pigment and examine how color and gloss are measured

• Learn how to protect coatings from UV

• Identify how to select and specify topcoats based on performance

Host: Durability + Design
Date: Wednesday, May 4, 2016
Time: 11:00 AM – 12:00 PM EST

Presented by:

Terry Wallace, Vice President of sales for Tnemec.

Terry Wallace serves as Vice President of Sales at Tnemec Company, Inc. Mr. Wallace served as vice president and co-owner of coatings manufacturer Chemprobe from 1993 to 1999 and gained technical expertise in architectural coatings and troubleshooting moisture intrusion issues involving all types of masonry structures. Following its acquisition, Chemprobe became the masonry division of Tnemec Company where he served as director of Masonry Products. In 2003, he transitioned into the position of director of Sales Development, which included responsibility for all Tnemec products that are sold to the architectural market. He is involved with several industry organizations, including the Construction Specifications Institute (CSI), the Society for Protective Coatings (SSPC), the National Association of Corrosion Engineers (NACE), the U.S. Green Building Council (USGBC), the Sealant Waterproofing and Restoration Institute (SWRI) and the National Concrete Masonry Association (NCMA). He is a NACE Level III Certified Coating Inspector, the Fluoropolymer Committee Chair for the SSPC, and holds a CSI Construction Documents Technologist designation. He also holds a NCMA Certified Consultant of Concrete Masonry designation and is a USGBC Leadership in Energy and Environmental Design (LEED) Accredited Professional. Mr. Wallace earned his bachelor’s degree in Industrial Marketing Management from California State Polytechnic University.

Jennifer Gleisberg, Architectural Market Manager for Tnemec.

Jennifer Gleisberg is the Architectural Market Manager for Tnemec Company Inc., where she provides sales support to Tnemec’s independent sales representatives. She is an active member, or has received credentials, from CSI (Construction Document Technologist – CDT), NACE (NACE Coatings Inspector – Level I Certified), The Society of Protective Coatings (SSPC), and the United States Green Building Council (USGBC), where she is a Leadership in Energy and Environmental Design (LEED) Green Associate (GA). With more than 10 years of experience in the coatings industry, Gleisberg brings a customer service perspective to architectural projects that require coating solutions.

Register here.

, , , , , , ,

One Response to "Upcoming Webinar: Selecting Exterior Topcoats Based on Aesthetic Performance"

  • Asher Kelman
    May 2, 2016 - 7:02 pm Reply

    I need UV resistant powder coating for large outdoor steel sculpture to be powder coated in Los Angeles area.

    Please book me for the Webinar.

    Also please provide me a link to a color chart!!!!!!

    Searched all over. That should be easily located on the main landing page of your website.

    Thanks so much

    Asher Kelman

    Kelman Art & Design Studio LLC

    310-717-6550

    Also pease provide locations in the greater LA region with large, 5 ft x 24 ft oven or as near as possible.

Leave a Reply

Your email address will not be published. Required fields are marked *