metal roofs are common amongst commercial buildings, for their durability and perceived long life cycles. While these roofs may never need replacement, overtime degradation occurs of the the baked-on PVDF coatings and requires refurbishing, exposing the bare metal underneath, resulting in red rust corrosion that can permanently damage the substrate.
For the roof restoration of this Baltimore, Maryland based office building; All-Tech Coatings was contacted for their expertise in recoating. To achieve a factory-like finish that can provide years of service with low wear, All-Tech Coatings applied a coating system that uses PPG's coraflon ADS that include Lumiflon FEVE fluoropolymer resins.
Over 130,000 square feet of metal roof panels were severely damaged from 30 years of exposure, with little to no upkeep. All-Tech contractors stripped the previous coating and prepared the surface to SSPC-SP6 commercial blast cleaning standards. The panels then received two coats of epoxy at 2.0-2.5 mills dft (dry film thickness), followed by a finish coat of Coraflon ADS in Slate Blue, at 1.5-2.0 mil DFT.
This coating system benefits the office-building roof, not only for its factory-like finish, but also for its proven longevity and durability. Lumiflon FEVE resin based coatings have been used on a myriad of restoration projects, from industrial waterworks and infrastructure, to high-rise architecture and even private residences. These coatings have been proven to provide long lasting color and gloss retention, with low-wear characteristics, that can potentially last as long as the buildings on which they are applied.
LUMIFLON®, a product of the Asahi Glass Company, is a fluoropolymer resin that offers distinct advantages to the architectural market. LUMIFLON® provides architects with the option of using brighter colors and higher gloss, allowing gloss values as high as 90; offers the flexibility to be heat cured or cured at ambient temperature, giving fabricators a choice between shop application or application in the field; and can be used successfully on a number of materials, including steel, aluminum, fiberglass, concrete and polycarbonate for 30 years without fading
All-Tech Coatings is a division at all-tech decorating Company; Romeoville, IL, which specializes in the application of high performance coatings on metal substrates, and mostly architectural standing seam metal roofing and curtain wall systems that have a baked on fluoropolymer finish.
ppg Industries; Pittsburgh, PA, is a leading coatings and specialty products and services company, serving customers in construction, consumer products, industrial and transportation markets and aftermarkets. PPG has manufacturing facilities and equity affiliates in more than 60 countries around the globe.
Images and information courtesy of © All-Tech Coatings.